Bearing NKI95/26 ISO

Grease Reference Speed:6000 rpm; Outside Diameter D:140.000 mm; Cr - Dynamic Load Rating:92.6 kN; Features:Contact Seals; Weight:2.10 Kg; Bore Size d:65 mm; C0r - Static Load Rating:59.7 kN; Oil Reference Speed:8600 rpm; Clearance:C3; Outside Ring Width B:33.000 mm;

Fillet Radius/Chamfer:2.1 mm; Inside Ring Outside Diameter:101 mm; Da (max):158 mm; ra (max):2 mm; B:58 mm; d:80 mm; ra1 (max):2 mm; Configuration:Single Row; dc (min):105 mm; Limiting Speed - Oil:4,000 rpm;

Oil Lubrication - T Seal:1700 rpm; Grease Lubrication - T Seal:1200 rpm; Weight:67 lb; Oil Lubrication - B/C/O Seal:600 rpm; Dimension D Min:10.06 in; C0 - Static Load:147000 lb; Dimension A:4.25 in; Int Radial Clearance Reduction Max:0.0028 in; Dimension F:14.25 in; Locking Style:Tapered Adapter;

ra (max):0.3 mm; Static Load Rating:5,800 N; a (max):1.3 mm; r1:0.3 mm; Da (max):63 mm; Fillet Radius/Chamfer:0.3 mm; Limiting Speed - Grease:10,000 rpm; Configuration:Single Row; Weight:0.054 kg; Cy (max):1.8 mm;

Bearing Number:23164K; D1:15.005 in; B2:9.101 in; Locknut:N-064; Series:231K; Tolerance1:-0.007 in; Diameter d :12 in; Lockwasher and Lockplates:P-64; Taper:1:12; Sleeve:S-3164 x 12;

a - Effective Center Location3:-4.3 mm; e - ISO Factor8:0.38; Aa - Cage-Cone Backface Clearance:0.5 mm; G1 - Heat Generation Factor (Roller-Raceway):18; R - Cone Backface To Clear Radius1:0.510 mm; d:34.925 mm; C - Cup Width:18.415 mm; D:69.012 mm; B:22.385 mm; Db - Cup Backface Backing Diameter:58.93 mm;

Fillet Radius/Chamfer:2.1 mm; Inside Ring Outside Diameter:101 mm; Da (max):158 mm; ra (max):2 mm; B:58 mm; d:80 mm; ra1 (max):2 mm; Configuration:Single Row; dc (min):105 mm; Limiting Speed - Oil:4,000 rpm;

r1:3 mm; D:215 mm; Static Load Rating:425,000 N; d:100 mm; db (max):125 mm; Weight:8.450 kg; Limiting Speed - Grease:2,400 rpm; dd (min):143 mm; Dynamic Load Rating:380,000 N; Radial Clearance:0.075 to 0.110 mm;

Housing Style:Four-Bolt Square Fla; Adapter Sleeve Number1:HE2310; Weight:5.7 lb; Bolt Hole Spacing J:111.00 mm; Center of Bearing from Bearing End Y:30 mm; Bolt Hole Size N:16 mm; Grease Nipple Size:A-1/4-2B UNF; Dimension A0:2.063 in; Dynamic Load Rating:7891 lbf; Flange Thickness A1:16.0 mm;

Static Load Rating:395,000 N; D:160 mm; dc (min):97 mm; Radial Clearance:0.065 to 0.100 mm; Configuration:Single Row; ra1 (max):2 mm; dd (min):106 mm; r1:2.1 mm; Fillet Radius/Chamfer:2.1 mm; Weight:5.300 kg;

Housing Style:Four-Bolt Square Fla; Adapter Sleeve Number1:HE2310; Weight:5.7 lb; Bolt Hole Spacing J:111.00 mm; Center of Bearing from Bearing End Y:30 mm; Bolt Hole Size N:16 mm; Grease Nipple Size:A-1/4-2B UNF; Dimension A0:2.063 in; Dynamic Load Rating:7891 lbf; Flange Thickness A1:16.0 mm;

Bearing Number:23164K; D1:15.005 in; B2:9.101 in; Locknut:N-064; Series:231K; Tolerance1:-0.007 in; Diameter d :12 in; Lockwasher and Lockplates:P-64; Taper:1:12; Sleeve:S-3164 x 12;

Pre Install Clearance Min:0.135 mm; Eng Internal Radial Clearance - Min:0.0053; Y2 - Geometry Factor:4.06; C0 - Static Load:147000 lb; Shaft Size Type:Imperial; Float:0.083 in; C - Dynamic Load (Basic):125000 lb; Shaft Size  :3-15/16 in; Dimension RV:0.41 in; Shaft Tolerance:0.0030 in;

Dimension BC:9.45 in; Shaft Size  :70 mm; Full Timken Part Number:QVVFC17V070SB; Locking Style:Double V-Lock; Oil Lubrication - T Seal:2400 rpm; Eng Internal Radial Clearance - Max:0.0047; Y2 - Geometry Factor:4.31; Oil Lubrication - M/N Seal:1400 rpm; Dimension F:8.35 in; Dimension L:3.61 in;